Building a deck is a fantastic way to enhance your outdoor space, but to ensure that the project is completed smoothly, a precise estimation of the material is essential. One of the key elements of this procedure is determining the number of decking boards (terasová prkna) you’ll need. Here’s a straightforward guide to help you with that calculation.
1. Measure Your Deck Area
Begin by measuring the total space of your deck. For decks that are rectangular, deck is rectangular, the procedure is fairly straightforward: simply multiply the length by the width. For decks that have irregular shapes, break the area into smaller rectangles or squares and measure each one, and then add up the areas.
For example, if your deck measures 12 feet by 20 feet, your total area is the equivalent of 240 square feet (12 20).
2. Determine Deck Board Dimensions
Decking boards come in various sizes however the most commonly used dimensions are 5.5 inches wide and one inch thick. The length of the board can differ but let’s consider that the length is 12 feet in this case. Convert the dimensions of your board into feet to simplify calculation. For example, a 5.5-inch wide board measures 0.46 feet wide.
3. Calculate Coverage per Board
To figure out the space each board is covering, figure out its width, in inches, and then multiply by the length. If a board is 12 feet long with 0.46 feet wide, the coverage per board is 5.52 sq. feet (12 x 0.46).
4. Account for Gaps and Waste
When decking boards are installed spaces between the boards are required to allow proper draining and expanding. In general, you should factor in a gap of about 1/8 inch to 1/4 inch. This will decrease the amount of area covered by the boards.
It is also important to take into account the possibility of cuts and waste. A good guideline is to add around 10 percent to the number of boards required. This will be enough to be sufficient to cover any cuts, mistakes, or warped boards.
5. Perform the Final Calculation
Dividing the area total of deck deck by the space that is covered by one board to determine the required number of boards. In our case, if the deck size is 240 sq. feet and every board is 5.52 square feet, you’ll require approximately 44 boards (240 / 5.52).
Adding 10% for waste, you’ll need about 49 boards (44 times 1.10).
6. Purchase Additional Supplies
Apart from wooden decking, it is possible to also require braces, joists, and maybe other materials to construct the frame and supports. Be sure to have the required items in your possession prior to beginning your project.
If you follow these steps, you can precisely estimate the amount of decking boards required for your project, assisting you avoid underestimating and unnecessary trip to the store for hardware. Enjoy building!
